Sediment Control
Storm Drain Inlet Protection
A sediment filter or an impounding area around or within a storm drain inlet or curb inlet.
Inspection Checklist
- Device is firmly in place and not bypassed.
- Fabric or gravel bags are intact.
- Drainage area is not flooded excessively (causing safety hazard).
Common Failures
- Clogging: Sediment buildup preventing any flow.
- Tearing: Filter bags ripping and dumping sediment into the drain.
- Displacement: Device pushed aside by heavy flow or traffic.
Maintenance & Corrections
- 1. Clean out sediment after every rain event.
- 2. Replace gravel bags if they split.
- 3. Remove protection once the catchment area is permanently stabilized.
Inspection Freq: Weekly and post-storm.
Digitize this Checklist
Stop using paper logs. RunOffTrack has a built-in, customizable checklist for Storm Drain Inlet Protection and 50+ other BMPs.
Add Photo Evidence
Draw on Site Map
Open Tool